2nd Generation Echo Dot Mount
Protect your All-New Echo Dot (2nd Generation) with this custom Echo Dot wall mount from Oeveo. Our Echo Dot Mount's custom design ensures that the mount perfectly cradles the All-New Echo Dot as to not impact sound quality. Place your Echo Dot wherever you'd like so that Alexa is always available and securely mounted. Mount your Dot vertically to a wall so that Alexa stands upright, or mount your Dot horizontally under your cabinet or on your ceiling to ensure that your Echo Dot always near.
- Echo Dot Mount Construction - Strong Steel Construction
- Echo Dot Mount Finish - Durable Flat Black Powder Coat
- Echo Dot Hardware - Black Steel Screw with wall Anchor
2nd Gen Echo Dot
Note that when Installing your 2nd Gen Echo Dot Mount the steps below should be considered guidelines as each installation is unique.
STEP ONE - Unpack your new 2nd Gen Echo Dot Mount and all components from package and inspect. The Echo Dot Mount should be shipped with 1 each fastener and accompanying anchor.
STEP TWO - Place Dot Mount on wall or mounting surface oriented so that the support tab is vertically positioned lower than the clamping support arms of the mount.
STEP THREE - Mark the location of the mounting hole on the surface using a marking instrument. This will indicate placement of mounting hole so that the Echo Dot Mount is accurately placed on your surface. The bit used to drill the hole should be slightly smaller than the fastener included with the mount
STEP FOUR - Drill the mounting hole and insert the anchor in the hole if the location does not connect with a stud in the wall.
STEP FIVE - Place 2nd Gen Echo Dot mount on surface aligning the mounting hole with the predrilled hole and anchor, if used, and insert fastener. Tighten the fastener snuggly so the the mount is firmly attached to the mounting surface. Do not over tighten as it may strip your anchor.
STEP SIX - Insert your Echo Dot into the mount, plug in and enjoy!