1st Generation Echo Dot Mount
The Echo Dot Mount for Amazon Echo Dot.
- Mount your Amazon Echo Dot (1st Generation) with the 1st Generation Echo Dot Mount.
- Easy Installation. Black 1" inch Screw and Anchor included with your package.
- Modern, Sleek, Minimalist Design blends in with the Amazon Echo Dot, and securely holds Alexa in place.
1st Gen Echo Dot
Installing your 1st Gen Echo Dot Mount. Note that every installation is unique and require steps not included in these guidelines.
STEP ONE - Unpack your new Echo Dot Mount and all components from package and inspect. The Echo Dot Mount should be shipped with 1 each fastener with anchor.
STEP TWO - Place Echo Dot Mount on wall or other mounting surface oriented so that the support tab is vertically positioned lower than the clamping support arms of the mount.
STEP THREE - Mark the location of the mounting hole on the surface with use of a pencil or other marking instrument. This is give you the mark for drilling your mounting hole so that the Echo Dot Mount is accurately placed on your surface. The bit used to drill the hole should be slightly smaller than the fastener included with the mount
STEP FOUR - Drill the mounting hole and insert the anchor in the hole if the location does not connect with a stud in the wall.
STEP FIVE - Place Echo Dot mount on surface aligning the mounting hole with the predrilled hole and anchor, if used, and insert fastener. Tighten the fastener snuggly so the the mount is firmly attached to the mounting surface. Do not over tighten as it may strip your anchor.
STEP SIX - Insert your 1st Gen Echo Dot into the mount, hook up to power and enjoy!